Source: rigpix
Transceivers
Updated: 09/02/2026
Alinco DJ-G29T
Confidence score: 50%
Estimated value
142€
Theoretical estimate
120€
Minimum
163€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- USA TX: 222-225 MHz (1.25 m) / 902-928 MHz (33 cm) RX: 216-250 MHz / 902-928 MHz
- Tuning steps
- 5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 100 / 125 / 150 / 200 / 500 KHz and 1 MHz
- Frequency stability
- ±2.5 ppm @ -10 to +45°C (14 to 113°F)
- Mode
- FM / NFM
- Channels / memory management
- 500 regular in five banks, with alpha tags 2 call (1 per band) 100 dual band 50 scan edge pairs (Program scan) 50 priority 100 pass Non-volatile EEPROM storage
- Repeater shift / offset
- ±0 to 999.995 MHz in 5 KHz steps
- Power supply
- 6-7.5 VDC (Depending on battery pack) or 7-16 VDC external
- Current drain / power consumption
- RX: 50-200 mA TX: Max 1.7 A
- Antenna impedance / connector
- 50 ohm / SMA
- Dimensions (W*H*D)
- 61*106*38 mm (2.4*4.17*1.5")
- Weight
- 296 g (10.44 oz), with EBP-73 and antenna
- Other features
- CTCSS/PL and DCS with tone scan. IPX7 submersible. Attenuator. 1000 / 1450 / 1750 / 2100 Hz tone call. Crossband repeater. Channel scope. Sweep scan. Dimmer. RIT / TXIT function. Roger beep. Full duplex. PC-programmable. Cloning. Twin RX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 51.65 MHz (Main) - 50.75 MHz (Sub) 2nd IF: 450 KHz
- Sensitivity
- 0.2 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 35 KHz (-60 dB)
- AF output power / speaker
- 400 mW at ?% distortion / 8 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- ? ohm / ?-pin
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Alinco DJ-G29T