Source: rigpix
Transceivers
Updated: 09/02/2026
Alinco DJ-G5T
Confidence score: 50%
Estimated value
No price analysis available yet.
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- USA TX: 144-148 / 438-450 MHz RX: 108-174 / 420-480 MHz
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
- Frequency stability
- ±? ppm
- Mode
- TX: FM RX: AM / FM
- Channels / memory management
- 160 regular (80 per band), expandable 2 call (1 per band) 20 DTMF auto-dialer 6 scan edge pairs (3 per band) Priority function
- Repeater shift / offset
- ±0 to 16 MHz in 5 KHz steps
- Power supply
- 4.5-9.6 VDC (Depending on battery pack) or 4.5-16 VDC external
- Current drain / power consumption
- RX: 25-85 mA (Squelched) TX: Max 1.5 A
- Antenna impedance / connector
- 50 ohm / BNC
- Dimensions (W*H*D)
- 57*138*28 mm (2.24*5.45*1.1")
- Weight
- 350 g (12.35 oz), with EBP-33N, belt clip and antenna
- Other features
- CTCSS/PL. DTMF keypad and DSQ paging. Channel scope. Sweep scan. Attenuator. Full duplex. 1750 Hz tone call. Backlit display and keypad. Cloning. Twin RX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 38.9 MHz (VHF) - 45.1 MHz (UHF) 2nd IF: 455 KHz
- Sensitivity
- 2 m: 0.16-0.25 uV (12 dB SINAD) 70 cm: 0.16-0.25 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 30 KHz (-60 dB)
- AF output power / speaker
- 100 mW at 10% distortion / 8 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / ?-pin
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Alinco DJ-G5T