Source: rigpix
Transceivers
Updated: 09/02/2026
Alinco DR-150E
Confidence score: 50%
Estimated value
455€
Theoretical estimate
387€
Minimum
524€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- Europe TX: 144-146 MHz RX: 108-174 / 430-440 MHz NB! The extended VHF RX frequency range may require modification
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
- Frequency stability
- ±10 ppm (No temperature reference)
- Mode
- TX: FM RX: AM / FM
- Channels / memory management
- 100 regular 1 call 1 scan edge pair (Program scan) Priority function
- Repeater shift / offset
- ±600 KHz (Default, programmable)
- Power supply
- 13.8 VDC
- Current drain / power consumption
- RX: Max 600 mA TX: Max 10 A
- Antenna impedance / connector
- 50 ohm / SO-239 (On pigtail)
- Dimensions (W*H*D)
- 140*40*129 mm (5.51*1.58*5.08")
- Weight
- 800 g (1.76 lb)
- Other features
- CTCSS/PL encoder. 1K2 / 9K6 packet jack. Attenuator. Dimmer. Channel scope. 1750 Hz tone call. Cloning. DTMF squelch (DSQ).
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 45.1 MHz 2nd IF: 455 KHz
- Sensitivity
- 2 m: 0.16 uV (12 dB SINAD) 70 cm: 0.3 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 28 KHz (-60 dB)
- AF output power / speaker
- 1.5 W at ?% distortion / 8 ohm
TRANSMITTER SECTION
- Modulation system
- Reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2.2 Kohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Alinco DR-150E