Source: rigpix
Transceivers
Updated: 09/02/2026
Alinco DR-235T
Confidence score: 50%
Estimated value
164€
Theoretical estimate
140€
Minimum
189€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- USA TX: 222-225 MHz RX: 216-280 MHz (RX/TX 200-299.995 MHz after modification, depending on VCO alignment)
- Tuning steps
- 5 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
- Frequency stability
- ±5 ppm (No temperature reference)
- Mode
- TX: FM / NFM RX: AM / FM / NFM
- Channels / memory management
- 100 regular with alpha tags 1 call 1 scan edge pair (Program scan) 10 DTMF autodial Non-volatile EEPROM storage
- Repeater shift / offset
- ±0 to 99.995 MHz
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 400-600 mA TX: Max 8 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 142*40*174 mm (5.59*1.58*6.85")
- Weight
- 1 Kg (2.2 lb)
- Other features
- CTCSS/PL and DCS with tone scan. DTMF. Theft alarm. Dimmer. 1000 / 1450 / 1750 / 2100 Hz tone call. 1K2/9K6 TNC option.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 30.85 MHz 2nd IF: 455 KHz
- Sensitivity
- 0.25 uV (12 dB SINAD)
- Selectivity
- FM: 12 KHz (-6 dB) 28 KHz (-60 dB) NFM: 6 KHz (-6 dB) 16 KHz (-60 dB)
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- TS "Minijack" (3.5 mm)
TRANSMITTER SECTION
- Modulation system
- Variable reactance frequency modulation
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 8-pin (Male locking ring jack)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Alinco DR-235T