Source: rigpix
Transceivers
Updated: 09/02/2026
Alinco DR-605E
Confidence score: 50%
Estimated value
61€
Theoretical estimate
52€
Minimum
70€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 136-174 / 420-470 MHz NB! The extended RX frequency range may require modification
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
- Frequency stability
- ±10 ppm (No temperature reference)
- Mode
- FM
- Channels / memory management
- 100 regular (50 per band) 2 call (1 per band)
- Repeater shift / offset
- ±0 to ? MHz
- Power supply
- 13.8 VDC
- Current drain / power consumption
- RX: Max 1.2 A TX: Max 11.5 A
- Antenna impedance / connector
- 50 ohm / SO-239 (On pigtail)
- Dimensions (W*H*D)
- 140*40*176 mm (5.51*1.57*6.93")
- Weight
- 1.1 Kg (2.42 lb)
- Other features
- CTCSS/PL encoder. Cloning. 1K2 / 9K6 packet jack. 1450 / 1750 / 2100 Hz tone call. Twin RX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 21.7 MHz (VHF) - 30.85 MHz (UHF) 2nd IF: 450 KHz (VHF) - 455 KHz (UHF)
- Sensitivity
- 0.16 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 28 KHz (-60 dB)
- AF output power / speaker
- 2 W at ?% distortion / 8 ohm
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- Modulation system
- Reactance modulation
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 8-pin (Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Alinco DR-605E