Source: rigpix
Transceivers
Updated: 09/02/2026
Alinco DR-610E
Confidence score: 50%
Estimated value
455€
Theoretical estimate
387€
Minimum
524€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 108-174 / 420-470 MHz NB! The extended RX frequency range may require modification
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
- Frequency stability
- ±10 ppm (No temperature reference)
- Mode
- TX: FM RX: AM / FM
- Channels / memory management
- 120 (Expandable) 2 call (1 per band) 2 scan edge pairs (Program scan), 1 per band Priority function
- Repeater shift / offset
- ±0 to 15.975 MHz in 25 KHz steps
- Power supply
- 13.8 VDC
- Current drain / power consumption
- RX: Max 1.2 A TX: Max 11.5 A
- Antenna impedance / connector
- 50 ohm / SO-239 (On pigtail)
- Dimensions (W*H*D)
- 140*40*162 mm (5.51*1.57*6.38")
- Weight
- 1.1 Kg (2.42 lb)
- Other features
- CTCSS/PL encoder. 1K2 / 9K6 packet jack. Channel scope. Attenuator (20 dB). DTMF squelch (DSQ). 1750 Hz tone call. Dimmer. Twin RX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 45.1 MHz (VHF) - 58.3 MHz (UHF) 2nd IF: 455 KHz
- Sensitivity
- Main band: 0.16 uV (12 dB SINAD) Sub band: 0.22 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 28 KHz (-60 dB)
- AF output power / speaker
- 2 W at 5% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- Modulation system
- Reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Alinco DR-610E