Source: rigpix
Receivers
Updated: 10/02/2026
AOR AR-DV1
Confidence score: 50%
Estimated value
557€
Theoretical estimate
473€
Minimum
640€
Maximum
Specifications
GENERAL
- Type
- HF/VHF/UHF receiver/scanner
- Frequency range
- 0.1-1300 MHz (Cellular blocked in the USA) Specifications not guaranteed below 0.53 MHz
- Tuning steps
- 10 / 50 / 100 / 500 Hz 1 / 2 / 5 / 6.25 / 7.5 / 8.33 / 9 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 500 KHz
- Frequency stability
- Less than ±2.5 ppm @ 0 to 50°C (32 to 122°F), after 5 minutes warmup
- Channels / memory management
- 2000 regular in 40 banks with alpha tags (12 characters) 1 priority 50 pass per bank or VFO Non-volatile EEPROM storage
- Power supply
- 10.8-16 VDC (Male barrel jack, center positive)
- Current drain / power consumption
- Less than 800 mA
- Antenna impedance / connector
- 50 ohm / BNC
- Dimensions (W*H*D)
- 178*50*214 mm (7*1.97*8.42")
- Weight
- 1.5 Kg (3.31 lb)
- Other features
- CTCSS/PL and DCS with tone search. DSP functions. Clock/timer/alarm. Audio recording. Discriminator output. SD/SDHC card slot. Micro-USB connector. Analog voice inversion descrambler (not available in the US).
RECEIVER SECTION
- Receiver system
- Direct sampling SDR (0.1-18 MHz) Double conversion superheterodyne (18-180 MHz) 1st IF: 393.0 MHz 2nd IF: 31.0 MHz Triple conversion superheterodyne (180-1300 MHz) 1st IF: 1705 MHz 2nd IF: 393.0 MHz 3rd IF: 31.0 MHz
- Sensitivity
- 0.53-18 MHz: 0.71 uV (12 dB SINAD) 18-1300 MHz: 0.32 uV (12 dB SINAD)
- Selectivity
- IF bandwidths: 200 / 500 Hz 1.8 / 2.6 / 3.8 / 5.5 / 6 / 8 / 15 / 30 / 100 / 200 KHz
- AF output power / speaker
- 1 W at ?% distortion / 8 ohm
- External speaker connector
- TS "minijack" (3.5 mm), 4-8 ohm
User reviews
Write a review
Share your experience with the AOR AR-DV1