Source: rigpix
Receivers
Updated: 10/02/2026
AOR AR-DV3
Confidence score: 50%
Estimated value
221€
Theoretical estimate
188€
Minimum
255€
Maximum
Specifications
GENERAL
- Type
- HF/VHF/UHF receiver/scanner
- Frequency range
- 0.1-3000 MHz (Cellular blocked in the USA)
- Tuning steps
- 10 / 50 / 100 / 500 Hz 1 / 2 / 5 / 6.25 / 7.5 / 8.33 / 9 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 500 KHz
- Frequency stability
- Less than ±1 ppm @ 0 to 50°C (32 to 122°F), after 5 minutes warmup
- Channels / memory management
- 2000 regular in 40 banks with alpha tags 400 search pairs 50 pass per bank Non-volatile EEPROM storage
- Power supply
- 10.7-16 VDC (Male barrel jack, center positive) or 15 VDC from USB-PD.
- Current drain / power consumption
- Max 1 A
- Antenna impedance / connector
- 50 ohm / BNC
- Dimensions (W*H*D)
- 178*50*180 mm (7*1.97*7.09")
- Weight
- 1.5 Kg (3.31 lb)
- Other features
- CTCSS/PL and DCS with tone search. DSP functions. Clock/timer/alarm. Audio recording. Discriminator output. SD/SDHC card slot. USB type C jack. Digital mode autodetect. Audio equalizer. Cyber search up to 600 steps per second. 8 different backlite colors selectable. 14 dB switchable preamp (Above 18 MHz). Attenuator (20 dB).
RECEIVER SECTION
- Receiver system
- Direct sampling SDR (0.1-18 MHz) Double conversion superheterodyne (18-3000 MHz) 1st IF: ? MHz 2nd IF: ? MHz
- Sensitivity
- AM (10 dB S/N) Less than 1 uV FM (12 dB SINAD) 0.1-18 MHz: 0.5 uV 18-1500 MHz: 0.3 uV 1500-3000 MHz: 0.5 uV WFM (12 dB SINAD) 60-108 MHz: 1 uV SSB (10 dB S/N) Less than 0.3 uV
- Selectivity
- IF bandwidths: 200 / 500 Hz 1.8 / 2.6 / 3.8 / 5.6 / 6 / 8 / 15 / 30 / 100 / 200 KHz
- AF output power / speaker
- 1 W at ?% distortion / 8 ohm
- External speaker connector
- TS "minijack" (3.5 mm), 4-8 ohm
User reviews
Write a review
Share your experience with the AOR AR-DV3