Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-1275
Confidence score: 50%
Estimated value
844€
Theoretical estimate
717€
Minimum
970€
Maximum
Specifications
GENERAL
- Type
- Amateur UHF transceiver
- Frequency range
- Japanese domestic market TX: 1260-1300 MHz RX: 1240-1300 MHz
- Tuning steps
- 20 Hz, 1 / 10 KHz, 1 MHz
- Frequency stability
- ±3 ppm @ 0 to 50°C (32 to 122°F)
- Mode
- FM / SSB / CW (ATV option)
- Channels / memory management
- 99 regular 2 scan edge 1 call RAM storage with lithium battery backup
- Repeater shift / offset
- Programmable
- Power supply
- Mains: 100-117 / 200-240 VAC ±10% (3-pin IEC C14 connector) or 13.8 VDC ±15%
- Current drain / power consumption
- RX: 1.7 to 1.9 A @ 13.8 VDC TX: 3.5 to 6 A @ 13.8 VDC
- Antenna impedance / connector
- 50 ohm / N-jack
- Dimensions (W*H*D)
- 241*95*239 mm (9.49*3.74*9.41")
- Weight
- 6.2 Kg (13.67 lb)
- Other features
- CTCSS/PL encoder. NB. CI-V. SWR-meter.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne (SSB/CW) 1st IF: 133.63 MHz (SSB), 133.6291 MHz (CW) 2nd IF: 10.75 MHz (SSB), 10.7491 MHz (CW) Triple conversion superheterodyne (FM) 1st IF: 133.63 MHz 2nd IF: 10.75 MHz 3rd IF: 455 KHz
- Sensitivity
- FM: 0.18 uV (12 dB SINAD) SSB/CW: 0.11 uV (10 dB S/N)
- Selectivity
- FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB/CW 2.3 KHz (-6 dB) 4.2 KHz (-60 dB)
- Image rejection
- >50 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- FM
- 1-10 W
- SSB (PEP)
- 1-10 W
- CW
- 1-10 W
- Modulation system
- FM: Variable reactance frequency modulation SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -50 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-1275