Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-201
Confidence score: 50%
Estimated value
339€
Theoretical estimate
288€
Minimum
390€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- TX: 144-146 MHz RX: 144-146 MHz
- Tuning steps
- Analog / continuous
- Frequency stability
- Less than ±2 KHz @ -10 to +60°C (14 to 140°F)
- Mode
- FM / SSB / CW
- Channels / memory management
- 4 optional XTAL-controlled
- Repeater shift/offset
- -600 KHz
- Power supply
- 13.8 VDC (2-pin connector). Mains option
- Current drain / power consumption
- RX: Max 900 mA @ 13.8 VDC TX: Max 2.8 A @ 13.8 VDC
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 230*110*260 mm (9.06*4.33*10.24")
- Weight
- 5.4 Kg (11.9 lb)
- Other features
- NB. RIT. VOX. Center meter.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne SSB/CW) IF: 10.7 MHz Double conversion superheterodyne (FM) 1st IF: 10.7 MHz 2nd IF: 455 KHz
- Sensitivity
- FM: 0.4 uV (20 dB S/N) SSB/CW: 0.5 uV (10 dB S/N)
- Selectivity
- FM 16 KHz (-6 dB) 32 KHz (-60 dB) SSB/CW 2.4 KHz (-6 dB) 4.8 KHz (-60 dB)
- AF output power / speaker
- ? W at ?% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- FM
- 10 W
- SSB (PEP)
- 10 W
- CW
- 10 W
- Modulation system
- FM: Variable reactance phase modulation SSB: Balanced modulation
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 500 ohm / 3-pin (Metal locking ring connector), very early version 500 ohm / 4-pin (Metal locking ring connector), later version
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-201