Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-211E
Confidence score: 50%
Estimated value
338€
Theoretical estimate
288€
Minimum
389€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- Europe TX: 144-146 MHz RX: 144-146 MHz
- Tuning steps
- 100 Hz / 5 KHz
- Frequency stability
- Less than ±1.5 KHz @ -10° to +60°C (14° to 140°F)
- Mode
- FM / SSB / CW
- Channels / memory management
- None
- Repeater shift / offset
- No dedicated. This radio splits between VFO A/B instead
- Power supply
- Mains: 200-240 VAC (3-pin IEC C14 connector) or 13.8 VDC
- Current drain / power consumption
- RX: 0.9 to 1.1 A TX: 1.8 to 3.3 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 241*111*264 (9.5*4.4*10.4")
- Weight
- 6.1 Kg (13.5 lb)
- Other features
- NB, VOX, dimmer, SWR-meter. 1750 Hz tone call.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne (SSB/CW) IF: 10.7 MHz Double conversion superheterodyne (FM) 1st IF: 10.7 MHz 2nd IF: 455 KHz
- Sensitivity
- FM: 0.6 uV (20 dB noise quieting) SSB/CW: <0.5 uV (10 dB S+N/N)
- Selectivity
- FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB/CW 2.4 KHz (-6 dB) 4.8 KHz (-60 dB)
- Image rejection
- >60 dB
- AF output power / speaker
- 1.5 W at ?% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- FM
- 1-10 W
- SSB (PEP)
- 10 W
- CW
- 10 W
- Modulation system
- FM: Variable reactance SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 4-pin (Metal locking ring connector)
- Microphone input level
- 10 mV (Typical)
User reviews
Write a review
Share your experience with the Icom IC-211E