Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-2340H
Confidence score: 50%
Estimated value
206€
Theoretical estimate
175€
Minimum
237€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency rangedepending on version
- Europe TX: 144-146 / 430-440 MHz RX: 144-146 / 430-440 MHz USA TX: 144-148 / 440-450 MHz RX: 144-148 / 440-450 MHz Australia TX: 144-148 / 430-440 MHz RX: 144-148 / 430-440 MHz Korea TX: 144-146 / 435.075-440 MHz RX: 144-146 / 435.075-440 MHz
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
- Frequency stability
- Max ? ppm
- Mode
- FM
- Channels / memory management
- 50 regular 2 scan edges 2 call (1 per band) Non-volatile EEPROM storage
- Repeater shift / offset
- ±?
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 1.2-1.8 A (Dual band receive) TX: 4-10.5 A
- Antenna impedance / connector
- 50 ohm / SO-239 (On pigtail)
- Dimensions (W*H*D)
- 140*40*165 mm (5.51*1.58*6.5")
- Weight
- 1.3 Kg (2.87 lb)
- Other features
- CTCSS/PL encoder. Twin RX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 17.2 MHz (VHF), 30.85 MHz (UHF) 2nd IF: 455 KHz
- Sensitivity
- 0.16 uV (12 dB SINAD)
- Selectivity
- 15 KHz (-6 dB) 30 KHz (-60 dB)
- AF output power / speaker
- 2.4 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 4-8 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance frequency modulation
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin modular (On pigtail)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-2340H