Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-2410H
Confidence score: 50%
Estimated value
660€
Theoretical estimate
561€
Minimum
759€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 118-174 MHz / 320-479 MHz USA TX: 144-148 / 440-450 MHz RX: 118-174 MHz / 320-479 MHz (The wide RX frequency range may require modification)
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 KHz
- Frequency stability
- ±? ppm @ -10 to +60°C (14 to 140°F)
- Mode
- TX: FM RX: AM / FM
- Channels / memory management
- 30 regular (15 per band) 2 call (1 per band) 2 scan edge pairs (1 per band) Priority watch RAM storage with lithium battery backup
- Repeater shift / offset
- Programmable
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 1.2 to 1.8 A TX: 4 to 10.5 A
- Antenna impedance / connector
- 50 ohm / SO-239 (On pigtail)
- Dimensions (W*H*D)
- 140*40*175 mm (5.51*1.58*6.89")
- Weight
- 1.35 Kg (2.98 lb)
- Other features
- CTCSS/PL encoder. Attenuator (20 dB). Dimmer. Crossband repeater. Twin RX (V+U, V+V or U+U).
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 17.2 MHz (VHF), 30.85 MHz (UHF) 2nd IF: 455 KHz
- Sensitivity
- 0.16 uV (12 dB SINAD)
- Selectivity
- 15 KHz (-6 dB) 30 KHz (-60 dB)
- AF output power / speaker
- 2.4 W at 10% distortion / 8 ohm
- External speaker connector
- Two 3.5 mm
TRANSMITTER SECTION
- Modulation system
- Variable reactance frequency modulation
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-2410H