Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-260A
Confidence score: 50%
Estimated value
86€
Theoretical estimate
74€
Minimum
99€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- USA TX: 143.8-148.2 MHz RX: 143.8-148.2 MHz
- Tuning steps
- 100 Hz, 1 / 5 KHz
- Frequency stability
- ±1.5 KHz @ -10 to +60°C (14 to 140°F)
- Mode
- FM / SSB / CW
- Channels / memory management
- 3 regular 2 band edge (for programmed scan) RAM storage
- Repeater shift / offset
- No dedicated. Use dual VFO split instead
- Power supply
- 13.8 VDC ±15% (3-pin connector)
- Current drain / power consumption
- RX: 600-800 mA TX: 1.6 to 3.1 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 185*64*223 mm (7.28*2.52*8.78")
- Weight
- 2.7 Kg (5.95 lb)
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne (SSB/CW) 1st IF: 10.75 MHz Double conversion superheterodyne (FM) 1st IF: 10.75 MHz 2nd IF: 455 KHz
- Sensitivity
- FM: 0.6 uV (20 dB noise quieting) SSB/CW: 0.5 uV (10 dB S+N/N)
- Selectivity
- FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB/CW 2.4 KHz (-6 dB) 4.8 KHz (-60 dB)
- AF output power / speaker
- 2 W at ?% distortion / 8 ohm
TRANSMITTER SECTION
- Modulation system
- FM: Variable reactance frequency modulation SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 1.3 Kohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-260A