Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-2720H
Confidence score: 50%
Estimated value
462€
Theoretical estimate
393€
Minimum
531€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- USA TX: 144-148 / 440-450 MHz RX: 118-550 / 810-1000 MHz Australia and Asia TX: 144-148 / 430-440 MHz RX: 118-550 / 810-1000 MHz Taiwan and Korea TX: 144-146 / 430-440 MHz RX: 118-550 / 810-1000 MHz (The wide RX frequency range may require modification)
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
- Frequency stability
- ±10 ppm @ -10 to +60°C (14 to 140°F)
- Mode
- TX: FM / NFM RX: AM / FM / NFM
- Channels / memory management
- 200 regular 5 scan edge pairs 2 call Non-volatile EEPROM storage
- Repeater shift / offset
- Programmable
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 1.2 to 1.8 A TX: Max 12 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- Main unit: 140*40*187 mm (5.51*1.58*7.36") Panel: 140*50*25 mm (5.51*1.97*0.98")
- Weight
- Main unit: 1.25 Kg (2.76 lb) Panel: 150 g (5.29 oz)
- Other features
- CTCSS/PL and DTCS. 1200/9600 bd packet jack. Twin RX (V+U, V+V, U+U)
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 38.85 MHz (Left band), 46.05 MHz (Right band) 2nd IF: 450 KHz (Left band), 455 KHz (Right band)
- Sensitivity
- 2 m/70 cm: 0.18 uV (12 dB SINAD)
- Selectivity
- FM 12 KHz (-6 dB) 30 KHz (-60 dB) NFM 6 KHz (-6 dB) 20 KHz (-60 dB)
- Image rejection
- 60 dB
- AF output power / speaker
- 2.4 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- Max FM deviation
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-2720H