Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-275H
Confidence score: 50%
Estimated value
1103€
Theoretical estimate
938€
Minimum
1269€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- Europe TX: 144-146 MHz RX: 138-174 MHz USA TX: 140.1-150 MHz RX: 138-174 MHz Australia TX: 144-148 MHz RX: 138-174 MHz (The wide RX frequency range may require modification)
- Tuning steps
- 10 Hz, 1 / 2.5 / 5 / 10 KHz
- Frequency stability
- ±5 ppm @ -10 to +60°C (14 to 140°F)
- Mode
- FM / SSB / CW
- Channels / memory management
- 99 regular 1 call 2 scan edge RAM storage with lithium battery backup
- Repeater shift / offset
- ±0-? MHz (600 KHz default)
- Power supply
- 13.8 VDC
- Current drain/power consumption
- RX: 0.9 to 1 A TX: Max 20 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 241*95*239 mm (9.5*3.7*9.4")
- Weight
- 6 Kg (13.2 lb)
- Other features
- CI-V computer control.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 10.75 MHz (FM/SSB), 10.7491 (CW) 2nd IF: 455 KHz
- Sensitivity
- FM: 0.18 uV (12 dB SINAD) SSB/CW: 0.1 uV (10 dB S/N)
- Selectivity
- FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB/CW 2.2 KHz (-6 dB) 4.2 KHz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- RF output power
- 10-100 W adjustable
- Modulation system
- FM: Variable reactance SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-275H