Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-475H
Confidence score: 50%
Estimated value
1210€
Theoretical estimate
1029€
Minimum
1392€
Maximum
Specifications
GENERAL
- Type
- Amateur UHF transceiver
- Frequency range
- Europe TX: 430-440 MHz RX: 430-440 MHz USA and Australia TX: 430-450 MHz RX: 430-450 MHz
- Tuning steps
- 10 Hz, 1 / 2.5 / 5 / 10 KHz
- Frequency stability
- ±5 ppm 0 to 50°C (32 to 122°F)
- Mode
- FM / SSB / CW
- Channels / memory management
- 99 regular 1 call 2 scan edge RAM storage with lithium battery backup
- Repeater shift / offset
- Programmable
- Power supply
- Mains: 117 VAC ±10% (3-pin IEC C14 connector) or 13.8 VDC ±15%
- Current drain / power consumption
- RX: 1.1 to 1.3 A @ 13.8 VDC TX: 8 to 20 A @ 13.8 VDC
- Antenna impedance / connector
- 50 ohm / N-jack
- Dimensions (W*H*D)
- 241*95*239 mm (9.49*3.74*9.41")
- Weight
- 6 Kg (13.23 lb)
- Other features
- CTCSS/PL encoder (USA). 1750 Hz tone call (Europe). NB. VOX. CI-V computer control.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne (FM) 1st IF: 7.45 MHz 2nd IF: 9.01 MHz 3rd IF: 455 KHz Quadruple conversion superheterodyne (SSB/CW) 1st IF: 70.45 MHz 2nd IF: 9.01 MHz 3rd IF: 455 KHz 4th IF: 9.01 MHz
- Sensitivity
- FM: 0.18 uV (12 dB SINAD) SSB/CW: 0.1 uV (10 dB S/N)
- Selectivity
- FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB/CW 2.3 KHz (-6 dB) 4 KHz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- RF output power
- 10-75 W adjustable
- Modulation system
- FM: Variable reactance frequency modulation SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-475H