Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-490E
Confidence score: 50%
Estimated value
396€
Theoretical estimate
337€
Minimum
455€
Maximum
Specifications
GENERAL
- Type
- Amateur UHF transceiver
- Frequency range
- Europe TX: 430-440 MHz RX: 430-440 MHz
- Tuning steps
- FM: 1 / 5 / 25 KHz SSB/CW: 100 Hz / 1 KHz
- Frequency stability
- ±2.5 KHz @ -10° to +60°C (14° to 140°F)
- Mode
- FM / SSB / CW
- Channels/memory management
- 5 regular RAM storage
- Repeater shift / offset
- Any inband in 100 KHz steps
- Power supply
- 13.8 VDC ±15% (Male 3-pin jack)
- Current drain / power consumption
- RX: 600-900 mA TX: Max 3.6 A
- Antenna impedance / connector
- 50 ohm / N-jack
- Dimensions (W*H*D)
- 170*64*218 mm (6.69*2.52*8.58")
- Weight
- 2.6 Kg (5.73 lb)
- Other features
- NB. Scanning. 1750 Hz repeater tone.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne (SSB/CW) 1st IF: 39.38 MHz 2nd IF: 10.75 MHz Triple conversion superheterodyne (FM) 1st IF: 39.38 MHz 2nd IF: 10.75 MHz 3rd IF: 455 KHz
- Sensitivity
- FM: 0.6 uV (20 dB quieting) SSB/CW: 0.5 uV (10 dB S+N/N)
- Squelch sensitivity
- Less than 0.4 uV (Threshold)
- Selectivity
- FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB/CW 2.4 KHz (-6 dB) 4.8 KHz (-60 dB)
- AF output power / speaker
- 2 W at ?% distortion / ? ohm
- External speaker connector
- TS "Minijack" (3.5 mm), 4-8 ohm
TRANSMITTER SECTION
- Modulation system
- FM: Variable reactance frequency modulation SSB: Balanced modulation
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 1.3 Kohm / 8-pin (Male locking ring jack)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-490E