Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-575H
Confidence score: 50%
Estimated value
1379€
Theoretical estimate
1172€
Minimum
1586€
Maximum
Specifications
GENERAL
- Type
- Amateur HF/VHF transceiver
- Frequency range
- TX: 28-29.7 / 50-54 MHz RX: 26-56 MHz
- Tuning steps
- 10 Hz, 1 / 2.5 / 5 / 10 KHz
- Frequency stability
- ±5 ppm @ 0 to +50°C (32 to 122°F)
- Mode
- AM / FM / SSB / CW
- Channels / memory management
- 99 regular 2 scan edge RAM storage with lithium battery backup
- Repeater shift / offset
- Programmable
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 1.4 to 1.6 A TX: Max 20 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 241*95*239 mm (9.49*3.74*9.41")
- Weight
- 6.1 Kg (13.45 lb)
- Other features
- CI-V computer control.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne (FM) 1st IF: 70.4515 MHz 2nd IF: 9.0115 MHz 3rd IF: 455 KHz Quadruple conversion superheterodyne (FM) 1st IF: 70.4515 MHz (SSB), 70.4506 MHz (CW), 70.450 MHz (AM) 2nd IF: 9.0115 MHz (SSB), 9.0106 MHz (CW), 9.010 MHz (AM) 3rd IF: 455 KHz 4th IF: 9.0115 MHz (SSB), 9.0106 MHz (CW), 9.010 MHz (AM)
- Sensitivity
- AM: <1 uV (10 dB S/N) FM: <0.25 uV (12 dB SINAD) SSB/CW: <0.13 uV (10 dB S/N)
- Selectivity
- AM 6 KHz (-6 dB) 15 KHz (-60 dB) FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB/CW 2.3 KHz (-6 dB) 4 KHz (-60 dB)
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- AM
- 5-25 W
- FM
- 10-100 W
- SSB (PEP)
- 10-100 W
- CW
- 10-100 W
- Modulation system
- AM: Low power FM: Variable reactance frequency modulation SSB: Balanced
- Max FM deviation (factory set)
- ±5 KHz
- Spurious emissions
- better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Male locking ring jack)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-575H