Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-718
Confidence score: 50%
Estimated value
431€
Theoretical estimate
361€
Minimum
502€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-160 m + WARC RX: 0.030-30 MHz
- Tuning steps
- 1 / 10 / 100 Hz, 1 / 5 / 9 / 10 / 100 KHz
- Frequency stability
- ±350 Hz @ 0 to 50°C (32 to 122°F)
- Mode
- AM / SSB / CW / RTTY
- Channels / memory management
- 99 regular 2 scan edges Non-volatile EEPROM storage
- Repeater shift / offset
- No
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 1.3 to 2 A TX: Max 20 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 240*95*239 mm (9.45*3.74*9.41")
- Weight
- 3.8 Kg (8.38 lb)
- Other features
- NB. Attenuator. VOX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 64.455 MHz 2nd IF: 455 KHz
- Sensitivity
- AM (10 dB S/N) 0.5-1.8 MHz: 13 uV 1.8-30 MHz: 2 uV SSB/CW/RTTY (10 dB S/N) 1.8-30 MHz: 0.16 uV
- Selectivity
- AM 6 KHz (-6 dB) 20 KHz (-40 dB) SSB/CW/RTTY 2.1 KHz (-6 dB) 4.5 KHz (-60 dB
- Image rejection
- 70 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- AM
- 2-40 W
- SSB (PEP)
- 2-100 W
- CW (DC)
- 2-100 W
- RTTY
- 2-100 W
- Modulation system
- AM: Low level SSB: Balanced
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -50 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-718