Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-720
Confidence score: 50%
Estimated value
238€
Theoretical estimate
202€
Minimum
273€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-160 m + WARC RX: 0.1-30 MHz
- Tuning steps
- 10 / 100 Hz, 1 KHz
- Frequency stability
- Less than 1 KHz @ -10 to +60°C (14 to 140°F), after 60 min warmup
- Mode
- AM / SSB / CW / RTTY
- Channels / memory management
- None
- Repeater shift / offset
- No
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 900 mA TX: Max 20 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 241*111*311 mm (9.49*4.37*12.24")
- Weight
- 7.5 Kg (16.53 lb)
- Other features
- PBT. VOX. NB. 20 dB attenuator. SWR-meter.
RECEIVER SECTION
- Receiver system
- Quadruple conversion superheterodyne 1st IF: 39.7315 MHz 2nd IF: 9.0115 MHz 3rd IF: 10.75 MHz 4th IF: 9.0115 MHz
- Sensitivity
- 0.25 uV (10 dB S+N/N)
- Selectivity
- AM 6 KHz (-6 dB) 18 KHz (-60 dB) AM-N (With optional filter installed) 5.2 KHz (-6 dB) 12 KHz (-60 dB) SSB/CW/RTTY 2.3 KHz, adjustable down to 800 Hz (-6 dB) 4.2 KHz (-60 dB) CW-N (With optional filter installed) 500 Hz (-3 dB) 1500 Hz (-60 dB)
- AF output power / speaker
- 2 W at ?% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- AM
- ~40 W
- SSB (PEP)
- ~100 W
- CW/RTTY
- ~100 W
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 1.3 Kohm / 8-pin (Metal locking ring connector)
- Microphone input level
- 120 mV (Typical)
User reviews
Write a review
Share your experience with the Icom IC-720