Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-7200
Confidence score: 50%
Estimated value
740€
Theoretical estimate
590€
Minimum
890€
Maximum
Specifications
GENERAL
- Type
- Amateur HF/VHF transceiver
- Frequency range
- TX: 10-160 m + WARC / 6 m RX: 0.03-60 MHz
- Tuning steps
- 1 / 10 / 100 Hz, 1 / 5 / 9 / 10 KHz
- Frequency stability
- ±? ppm
- Mode
- AM / SSB / CW / RTTY
- Channels / memory management
- 199 regular 2 scan edges Non-volatile EEPROM storage
- Repeater shift / offset
- None
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 1.3 to 2 A TX: Max 22 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 241*84*281 mm (9.5*3.3*11.1")
- Weight
- 5.5 Kg (12.1 lb)
- Other features
- Water resistant. USB-connector. CI-V. 20 dB attenuator. Voice synthesizer. Twin PBT. VOX. NB. 32-bit IF DSP.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne 1st IF: 64.455 MHz 2nd IF: 455 KHz 3rd IF: 15.625 KHz
- Sensitivity
- AM (preamp on, sharp filter, 10 dB S/N) 0.5-1.8 MHz: 13 uV 1.8-29.7 MHz: 2 uV 50-54 MHz: 1 uV SSB/CW (preamp on, sharp filter, 10 dB S/N) 1.8-29.7 MHz: 0.16 uV 50-54 MHz: 0.13 uV
- Selectivity
- AM (6 KHz BW) 6 KHz (-6 dB) 15 KHz (-60 dB) SSB (2.4 KHz BW) 2.4 KHz (-6 dB) 3.6 KHz (-60 dB) CW (500 Hz BW) 500 Hz (-6 dB) 900 Hz (-60 dB) RTTY (350 Hz BW) 360 Hz (-6 dB) 650 Hz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm (Mono), 8 ohm
TRANSMITTER SECTION
- AM
- 1-25 W
- SSB (PEP)
- 2-100 W
- CW/RTTY
- 2-100 W
- Modulation system
- AM: Digital low power modulation SSB: Digital PSN modulation
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- HF: Better than -50 dB 6 m: Better than -63 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-7200