Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-745
Confidence score: 50%
Estimated value
354€
Theoretical estimate
272€
Minimum
435€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-160 m + WARC RX: 0.1-30 MHz
- Tuning steps
- 10 / 50 Hz, 1 KHz
- Frequency stability
- Less than 1 KHz @ -10 to +60°C (14 to 140°F)
- Mode
- TX: SSB / CW / RTTY (FM option) RX: AM / SSB / CW / RTTY (FM option)
- Channels/memory management
- 16 regular (Tunable) RAM storage with lithium battery backup
- Repeater shift / offset
- No dedicated, use VFO A/B split ("Duplex") instead
- Power supply
- 13.8 VDC ±15% (Mains option)
- Current drain / power consumption
- RX: 1.5 A (Squelched) TX: Max 20 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 280*111*355 mm (11*4.37*14")
- Weight
- 8 Kg (17.64 lb), without options
- Other features
- PBT. NB. VOX. Transverter terminal.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne 1st IF: 70.4515 MHz 2nd IF: 9.0115 MHz 3rd IF: 455 KHz
- Sensitivity
- AM (10 dB S/N) 0.1-1.6 MHz: 20 uV 1.6-30 MHz: 1 uV FM (12 dB SINAD, with optional EX-242) 1.6-30 MHz: 0.3 uV SSB/CW/RTTY (10 dB S/N) 0.1-1.6 MHz: 3.2 uV 1.6-30 MHz: 0.15 uV
- Selectivity
- AM 4 KHz (-6 dB) 15 KHz (-60 dB) AM (Filter switch ON) 2.4 KHz (-6 dB) 4.8 KHz (-60 dB) FM (With optional EX-242) 15 KHz (-6 dB) 30 KHz (-50 dB) SSB/CW/RTTY 2.2 KHz (Adjustable down to 800 Hz) (-6 dB) 4.2 KHz (-60 dB)
- AF output power / speaker
- 2.8 W at ?% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- Max FM deviation (Factory set)
- ±? KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ~12 mV (Typical)
User reviews
Write a review
Share your experience with the Icom IC-745