Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-756
Confidence score: 50%
Estimated value
603€
Theoretical estimate
512€
Minimum
693€
Maximum
Specifications
GENERAL
- Type
- Amateur HF/VHF transceiver
- Frequency range
- TX: 10-160 m + WARC / 6 m RX: 0.03-60 MHz
- Tuning steps
- 1 / 10 Hz, 1 / 5 / 9 / 10 KHz
- Frequency stability
- Less than ±350 Hz @ 0 to 50°C (32 to 122°F)
- Mode
- AM / FM / SSB / CW / RTTY
- Channels / memory management
- 99 regular 2 scan edge Non-volatile EEPROM storage
- Repeater shift / offset
- ±100 KHz to 4 MHz in 1 KHz steps
- Power supply
- 13.8 VDC ±15% plus a 3 V lithium battery for timekeeping
- Current drain / power consumption
- RX: 2.5 to 2.7 A TX: Max 20 A
- Antenna impedance / connector
- 50 ohm / Two SO-239
- Dimensions (W*H*D)
- 340*111*285 mm (13.39*4.37*11.22")
- Weight
- 10.5 Kg (23.15 lb)
- Other features
- CTCSS/PL. Electronic keyer and auto-ATU. Clock & timer. DSP. CI-V computer control.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne (FM) 1st IF: 69.01 MHz 2nd IF: 9.01 MHz 3rd IF: 455 KHz Quadruple conversion superheterodyne (AM/SSB/CW/RTTY) 1st IF: 69.01 MHz 2nd IF: 9.01 MHz 3rd IF: 455 KHz 4th IF: 15.625 KHz
- Selectivity
- AM 9 KHz (-6 dB) 20 KHz (-60 dB) FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB/CW/RTTY 2.4 KHz (-6 dB) 3.8 KHz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm (mono)
TRANSMITTER SECTION
- AM
- 1-40 W
- FM
- 2-100 W
- SSB (PEP)
- 2-100 W
- CW
- 2-100 W
- Modulation system
- AM/SSB: PSN modulation FM: Variable reactance modulation
- Max FM deviation (Factory set)
- ±? KHz
- Spurious emissions
- HF: Better than -50 dB 6 m: Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-756