Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-756 Pro
Confidence score: 50%
Estimated value
565€
Theoretical estimate
361€
Minimum
770€
Maximum
Specifications
GENERAL
- Type
- Amateur HF/VHF transceiver
- Frequency range
- TX: 10-160 m + WARC / 50-54 MHz RX: 0.03-60 MHz
- Tuning steps
- 1 Hz, 0.1 / 1 / 5 / 9 / 10 / 12.5 / 20 / 25 KHz
- Frequency stability
- Better than ±0.5 ppm (-10 to +50°C / +14 to +122°F)
- Mode
- AM / FM / SSB / CW / RTTY
- Channels / memory management
- 99 regular 2 scan edge Non-volatile EEPROM storage
- Repeater shift / offset
- ±0 to 4 MHz in 1 KHz steps
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 3 to 3.5 A TX: Max 23 A
- Antenna impedance / connector
- 50 ohm / 2*SO-239 + 1 phono/RCA
- Dimensions (W*H*D)
- 340*111*285 mm (13.4*4.37*11.22")
- Weight
- 9.6 Kg (21.2 lb)
- Other features
- CTCSS/PL, IF-DSP. Built-in auto-AT (HF: 16.7-150 ohm / 6 m: 20-125 ohm) Spectrum scope. CI-V computer control. Built-in keyer and RTTY demodulator
RECEIVER SECTION
- Receiver system
- Triple-conversion superheterodyne 1st IF: 64.455 MHz 2nd IF: 455 KHz 3rd IF: 36 KHz
- Selectivity
- AM (BW=6 KHz) >6 KHz (-6 dB) <15 KHz (-60 dB) FM (BW=15 KHz) >12 KHz (-6 dB) <20 KHz (-60 dB) SSB/RTTY (BW=2.4 KHz) >2.4 KHz (-6 dB) <2.8 KHz (-60 dB) CW (BW=500 Hz) >500 Hz (-6 dB) <700 Hz (-60 dB)
- Image rejection
- >70 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- AM
- 5-40 W
- FM
- 5-100 W
- SSB (PEP)
- 5-100 W
- CW (DC)
- 5-100 W
- RTTY
- 5-100 W
- Modulation system
- AM: Low power modulation FM: Phase modulation SSB: PSN modulation
- Max FM deviation (Factory set)
- ±? KHz
- Spurious emissions
- HF: Better than -50 dB 6 m: Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-756 Pro