Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-775DSP
Confidence score: 50%
Estimated value
1031€
Theoretical estimate
876€
Minimum
1186€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-160 m + WARC RX: 0.1-30 MHz
- Tuning steps
- 1 / 10 / 20 / 50 Hz 1 / 9 / 10 KHz 1 MHz Any step between 1 KHz to 1 MHz is also programmable
- Frequency stability
- ±30 Hz/hr @ 25°C (77°F), after 1 hr warmup
- Mode
- AM / FM / SSB / CW / RTTY
- Channels / memory management
- 99 regular 2 scan edge RAM storage with lithium battery backup (CR-2032)
- Repeater shift / offset
- No dedicated. Use VFO A/B split instead
- Power supply
- Mains: 100-120 VAC or 220-240 VAC (Depending on market)
- Current drain / power consumption
- RX: 140-150 VA TX: Max 760 VA
- Antenna impedance / connector
- 50 ohm (16.7-150 ohm with ATU) / Two SO-239
- Dimensions (W*H*D)
- 424*150*390 mm (16.7*5.9*15.4")
- Weight
- 16.7 Kg (36.8 lb)
- Other features
- Electronic keyer and auto-ATU. CTCSS/PL. CI-V. VOX. Dual watch. AF-DSP
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne (FM) 1st IF: 69.01 MHz 2nd IF: 9.01 MHz 3rd IF: 455 KHz Quadruple conversion superheterodyne (AM/SSB/CW/RTTY) 1st IF: 69.01 MHz 2nd IF: 9.01 MHz 3rd IF: 455 KHz 4th IF: 10.695 MHz
- Sensitivity
- AM (10 dB S/N) 0.5-1.8 MHz: 13 uV 1.8-30 MHz: 2 uV FM (12 dB SINAD) 28-30 MHz: 0.5 uV SSB/CW/RTTY (10 dB S/N) 0.1-0.5 MHz: 2 uV 1.8-30 MHz: 0.16 uV
- Selectivity
- AM (Normal filter selection) >6 KHz (-6 dB) <20 KHz (-60 dB) FM (Normal filter selection) >15 KHz (-6 dB) <30 KHz (-60 dB) SSB (Normal filter selection) >2.4 KHz (-6 dB) <4 KHz (-60 dB) CW/RTTY (Normal filter selection) >500 Hz (-6 dB) <1 KHz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 2.6 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- AM
- 5-50 W
- FM
- 5-200 W
- SSB (PEP)
- 5-200 W
- CW/RTTY
- 5-200 W
- Max FM deviation (Factory set)
- ±? KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-775DSP