Source: rigpix
Transceivers
Updated: 09/02/2026
Icom IC-T10
Confidence score: 50%
Estimated value
45€
Theoretical estimate
38€
Minimum
52€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 76-108 / 136-174 / 400-479 MHz USA TX: 144-148 / 430-450 MHz RX: 88-108 / 136-174 / 400-479 MHz Export TX: 136-174 / 400-479 MHz RX: 76-108 / 136-174 / 400-479 MHz
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 125 / 200 KHz
- Frequency stability
- ±2.5 ppm @ -20 to +60°C (-4 to +140°F)
- Mode
- TX: FM / NFM RX: FM / NFM / WFM
- Channels / memory management
- 200 regular with alpha tags (6 characters) 3 scan edge pairs 2 call (1 per band) 10 NOAA weather channels (US version only) Non-volatile EEPROM storage
- Repeater shift / offset
- ±0-20 MHz in selected step size
- Power supply
- 7.2 VDC
- Current drain / power consumption
- RX: Max 600 mA TX: Max 2.5 A
- Antenna impedance / connector
- 50 ohm / SMA
- Dimensions (W*H*D)
- 52*112*30 mm (2.1*4.4*1.2")
- Weight
- 275 g (9.7 oz), with BP-280
- Other features
- CTCSS/PL and DTCS with tone scan. DTMF. VOX. 1750 Hz tone call. Cloning. Weather alert (USA only). IP67 dust-tight and waterproof. MIL-STD810C, D, E, F & G compliant.
RECEIVER SECTION
- Receiver system
- Direct conversion
- Sensitivity
- 0.18 uV (12 dB SINAD)
- Selectivity
- FM: 25 KHz (-55 dB) NFM: 12.5 KHz (-50 dB)
- Image rejection
- 60 dB
- AF output power / speaker
- 1.5 W at 10% distortion / 8 ohm (Internal speaker)
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- Modulation system
- Frequency shift keying modulation
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dBc
- Microphone impedance / connector
- 2.2 Kohm / 2.5 mm-pin
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Icom IC-T10