Icom IC-W21ET

Source: rigpix

Transceivers
Updated: 09/02/2026

Icom IC-W21ET

Confidence score: 50%
Estimated value
231€

Theoretical estimate

197€

Minimum

266€

Maximum

Specifications

GENERAL

Type
Amateur VHF/UHF transceiver
Frequency rangedepending on version
Europe (General): TX: 144-146 / 430-440 MHz RX: 100-950 MHz Denmark: TX: 144-146 / 432-438 MHz RX: 100-950 MHz Italy: TX: 144-148 / 430-440 MHz RX: 100-950 MHz NB! The wide RX frequency range may require modification
Tuning steps
5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Frequency stability
±5 ppm @ 0 to 50°C (32 to 122°F)
Mode
TX: FM RX: AM / FM
Channels / memory management
64 regular (32 per band) 2 repeater (1 per band) 2 call (1 per band) 2 scan edge pairs (1 per band) Priority function RAM storage with rechargeable backup battery (Supercap?)
Repeater shift / offset
±0 to 60 MHz in selected step size
Power supply
7.2-12 VDC (Depending on battery pack) or 6-16 VDC external (Barrel connector, center positive)
Current drain / power consumption
RX: 15-200 mA TX: 0.5-1.5 A
Antenna impedance / connector
50 ohm / BNC
Dimensions (W*H*D)
57*125*35 mm (2.24*4.92*1.38"), with BP-157
Weight
390 g (13.76 oz), with BP-157 and antenna
Other features
1750 Hz tone call. CTCSS/PL option. Cross band repeater function. DTMF. Clock/timer. Backlit display. Twin RX (V+U, V+V or U+U reception).

RECEIVER SECTION

Receiver system
Double conversion superheterodyne 1st IF: 43.1 MHz (VHF) - 45.15 MHz (UHF) 2nd IF: 455 KHz
Sensitivity
2 m/70 cm: 0.16 uV (12 dB SINAD)
Selectivity
15 KHz (-6 dB) 30 KHz (-60 dB)
Image rejection
60 dB
AF output power / speaker
200 mW at 10% distortion / 8 ohm
External speaker connector
3.5 mm

TRANSMITTER SECTION

Modulation system
Variable reatance frequency modulation
Max FM deviation (Factory set)
±5 KHz
Spurious emissions
Better than -60 dB
Microphone impedance / connector
2 Kohm / 3-conductor (2.5 mm)
Microphone input level
? mV
User reviews

Write a review

Share your experience with the Icom IC-W21ET

0/10 characters minimum