Icom ID-50A

Source: rigpix

Transceivers
Updated: 08/02/2026

Icom ID-50A

Confidence score: 50%
Estimated value
235€

Theoretical estimate

199€

Minimum

270€

Maximum

Specifications

GENERAL

Type
Amateur VHF/UHF transceiver
Frequency range
USA TX: 144-148 / 430-450 MHz RX: 88-108 / 108-174 / 375-479 MHz
Tuning steps
5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 / 125 / 200 KHz
Frequency stability
±2.5 ppm @ @ 25°C (77°F)
Mode
TX: FM / NFM and DV (D-Star) RX: AM / FM / NFM / WFM and DV (D-Star)
Channels / memory management
500 regular 4 call 25 scan edge pairs 100 skip 500 broadcast 2500 repeater lists 300 callsigns 300 GPS
Repeater shift / offset
Programmable
Power supply
5.5-7.4 VDC (Depending on battery pack) or 10-16 VDC external
Current drain / power consumption
RX: 200-450 mA TX: Max 2.5 A
Antenna impedance / connector
50 ohm / SMA
Dimensions (W*H*D)
58*111*28 mm (2.28*4.37*1.1")
Weight
300 g (10.6 oz), with BP-272 and antenna
Other features
CTCSS/PL and DTCS. DR function. Terminal and access point mode. Built-in GPS. Picture sharing via app. Bandscope and waterfall. D-Star text messaging. MicroSD card slot. USB-C connector. Voice recorder. IPX7 rating. Twin RX

RECEIVER SECTION

Receiver system
? conversion superheterodyne
Sensitivity
Ham bands FM/NFM: 0.18 uV (12 dB SINAD) DV: 0.2 uV (1% BER)
Selectivity
FM >55 dB? NFM/DV >50 dB?
AF output power / speaker
750 mW at ?% distortion / 8 ohm

TRANSMITTER SECTION

Modulation system
FM: Reactance modulation DV: GMSK reactance modulation
Max FM deviation (Factory set)
FM: ±5 KHz NFM: ±2.5 KHz
Spurious emissions
Better than -60 dBc (High, Mid) Better than -13 dBm (Low2, Low1, S-Low)
Microphone impedance / connector
2.2 Kohm / ?-pin
Microphone input level
? mV
User reviews

Write a review

Share your experience with the Icom ID-50A

0/10 characters minimum