Source: rigpix
Receivers
Updated: 10/02/2026
JRC NRD-525
Confidence score: 50%
Estimated value
427€
Theoretical estimate
298€
Minimum
556€
Maximum
Specifications
GENERAL
- Type
- HF/VHF/(UHF) receiver
- Frequency range
- 0.09-34 MHz (34-60 / 114-174 / 423-456 MHz option)
- Tuning steps
- 10 Hz, 1 / 5 KHz
- Frequency stability
- ±3 ppm
- Mode
- AM / FM / SSB / CW / RTTY / FAX
- Channels / memory management
- 200 regular RAM storage with lithium battery backup
- Power supply
- Mains: 100 / 120 / 220 / 240 VAC (3-pin IEC C14 connector) or 12-16 VDC (2-pin connector)
- Current drain / power consumption
- Less than 35 VA @ mains Less than 1.9 A @ 13.8 VDC
- Antenna impedance / connector
- HF 50 ohm / SO-239 600 ohm / Spring terminals VHF/UHF (For the CMK-165 converter option) 50 ohm / Two SO-239
- Dimensions (W*H*D)
- 330*130*280 mm (13*5.12*11.02")
- Weight
- 8.62 Kg (19 lb)
- Other features
- 24 hr clock/timer. Notch filter. NB. PBS. Attenuator. Dimmer.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 70.455 MHz 2nd IF: 455 KHz
- Sensitivity
- AM (10 dB S/N) 0.09-1.6 MHz: 15 uV 1.6-34 MHz: 2 uV 34-60 MHz: 3 uV 114-174 MHz: 3 uV 425-445 MHz: 3 uV FM (12 dB SINAD) 1.6-34 MHz: 0.7 uV 34-60 MHz: 1.5 uV 114-174 MHz: 1.5 uV 425-445 MHz: 1.5 uV SSB/CW/RTTY/FAX (10 dB S/N) 0.09-1.6 MHz: 5 uV 1.6-34 MHz: 0.5 uV 34-60 MHz: 1 uV 114-174 MHz: 1 uV 425-445 MHz: 1 uV
- Selectivity
- AUX: 12 KHz (-6 dB), default. Optional filters available Wide: 4 KHz (-6 dB), 10 KHz (-60 dB) Inter: 2 KHz (-6 dB), 6 KHz (-60 dB) Narr: 1 KHz (-6 dB), 3 KHz (-60 dB), optional filter required FM: 12 KHz (-6 dB) NB! The "Narr" bandwidth is measured with CFL-233 installed
- AF output power / speaker
- 500 mW at 10% distortion / 4 ohm
- External speaker connector
- Phono (RCA)
User reviews
Write a review
Share your experience with the JRC NRD-525