Source: rigpix
Receivers
Updated: 10/02/2026
JRC NRD-535
Confidence score: 50%
Estimated value
467€
Theoretical estimate
400€
Minimum
533€
Maximum
Specifications
GENERAL
- Type
- HF receiver
- Frequency range
- 0.05-30 MHz
- Tuning steps
- 1 / 10 / 100 Hz, 1 KHz
- Frequency stability
- ±2.5 ppm after 50 minutes warmup (±0.5 ppm option)
- Mode
- AM / FM / SSB / CW / RTTY / FAX
- Channels / memory management
- 200 regular RAM storage with lithium battery backup (CR2032)
- Power supply
- Mains: 100 / 120 / 220 / 240 VAC (3-pin IEC C14 connector) or 12-16 VDC (2-pin connector)
- Current drain / power consumption
- Less than 35 VA @ mains Less than 1.9 A @ 13.8 VDC
- Antenna impedance / connector
- 50 ohm / SO-239 600 ohm / Spring terminals
- Dimensions (W*H*D)
- 330*130*287 mm (13*5.12*11.3")
- Weight
- 9 Kg (19.84 lb)
- Other features
- Notch filter. RS-232C remote control. PBS. Clock/timer. Dimmer.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne 1st IF: 70.455 MHz 2nd IF: 455 KHz 3rd IF: 97 KHz
- Sensitivity
- AM (10 dB S/N) 0.1-0.5 MHz: 15.8 uV 0.5-1.6 MHz: 6.3 uV 1.6-30 MHz: 2 uV FM (12 dB SINAD) 1.6-30 MHz: 0.5 uV SSB/CW/RTTY/FAX (10 dB S/N) 0.1-0.5 MHz: 5 uV 0.5-1.6 MHz: 2 uV 1.6-30 MHz: 0.32 uV
- Selectivity
- AUX: 12 KHz (-6 dB), default. Optional filters available Wide: 4 KHz (-6 dB), 10 KHz (-60 dB) Inter: 2 KHz (-6 dB), 6 KHz (-60 dB) Narr: 1 KHz (-6 dB), 3 KHz (-60 dB), optional filter required FM: 12 KHz (-6 dB) NB! The "Narr" bandwidth is measured with CFL-233 installed NB! With the optional Bandwidth Control Unit (CFL-243) installed, the "Inter" filter can be continuously narrowed down to about 500 Hz via the BWC knob.
- Image rejection
- >70dB
- AF output power / speaker
- 1 W at 10% distortion / 4 ohm
- External speaker connector
- Phono (RCA)
User reviews
Write a review
Share your experience with the JRC NRD-535