Source: rigpix
Receivers
Updated: 09/02/2026
Kenwood R-2000
Confidence score: 50%
Estimated value
228€
Theoretical estimate
177€
Minimum
279€
Maximum
Specifications
GENERAL
- Type
- HF (VHF) receiver
- Frequency range
- 0.15-30 MHz (118-174 MHz option)
- Tuning steps
- 50 / 500 Hz, 5 KHz
- Frequency stability
- Within ±50 Hz during any 30 minute period after 60 minutes warmup
- Mode
- AM / FM / SSB / CW
- Channels / memory management
- 10 regular
- Power supply
- Mains: 100 / 120 / 220 / 240 VAC or 13.8 VDC option
- Current drain / power consumption
- 14 W (No signal) @ mains 600 mA (No signal) @ 13.8 VDC
- Antenna impedance / connector
- 50-75 ohm / SO-239 500 ohm / Spring terminals
- Dimensions (W*H*D)
- 375*115*210 mm (14.76*4.53*8.27")
- Weight
- 5.5 Kg (12.13 lb)
- Other features
- Four-step attenuator: 0-10-20-30 dB. Dual clocks with timer. Tone control. Slow/Fast AGC selector. NB. Dimmer. All mode squelch circuit. Scanning.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne 1st IF: 45.9 MHz 2nd IF: 9.9 MHz 3rd IF: 455 KHz
- Sensitivity
- AM (10 dB S+N/N): 0.15-2 MHz <20 uV, 2-30 MHz <4 uV FM (20 dB S+N/N): 2-30 MHz <1 uV SSB/CW (10 dB S+N/N): 0.15-2 MHz <2 uV, 2-30 MHz <0.4 uV
- Squelch sensitivity
- AM/SSB/CW: Less than 3.12 uV (Threshold) FM: Less than 0.5 uV (Threshold)
- Selectivity
- AM-Wide 6 KHz (-6 dB) 18 KHz (-50 dB) AM-Narrow 2.7 KHz (-6 dB) 5 KHz (-50 dB) FM 15 KHz (-6 dB) 30 KHz (-50 dB) SSB/CW 2.7 KHz (-6 dB) 5 KHz (-50 dB) CW-Narrow (With optional YG-455C CW filter) 500 Hz (-6 dB) 820 Hz (-60 dB)
- Image rejection
- >70 dB
- AF output power / speaker
- 1.5 W at 10% distortion / 8 ohm
- External speaker connector
- TS "Minijack" (3.5 mm), 4-16 ohm
User reviews
Write a review
Share your experience with the Kenwood R-2000