Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TH-46AT
Confidence score: 50%
Estimated value
461€
Theoretical estimate
392€
Minimum
530€
Maximum
Specifications
GENERAL
- Type
- Amateur UHF transceiver
- Frequency range
- USA TX: 438-450 MHz RX: 438-450 MHz
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 KHz
- Frequency stability
- ±? ppm
- Mode
- FM
- Channels / memory management
- 20 regular Channel 11-20 can also store odd splits 1 call RAM storage with lithium battery backup
- Repeater shift / offset
- ±5 MHz
- Power supply
- 5-12 VDC (Depending on battery pack) or 6-16 VDC external (Barrel connector, center positive)
- Current drain / power consumption
- RX: 65 mA (Squelched) TX: 0.15-2 A
- Antenna impedance / connector
- 50 ohm / BNC
- Dimensions (W*H*D)
- 58*135*30 mm (2.28*5.32*1.18")
- Weight
- 380 g (13.4 oz), with battery pack and antenna
- Other features
- DTMF keypad. Backlit display.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 30.825 MHz 2nd IF: 455 KHz
- Sensitivity
- 0.18 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 28 KHz (-40 dB)
- AF output power / speaker
- 200 mW at 10% distortion / 8 ohm
- External speaker connector
- 2.5 mm
TRANSMITTER SECTION
- Modulation system
- Reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 3-conductor (3.5 mm)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TH-46AT