Kenwood TH-D7A

Source: rigpix

Transceivers
Updated: 09/02/2026

Kenwood TH-D7A

Confidence score: 50%
Estimated value
471€

Theoretical estimate

401€

Minimum

542€

Maximum

Specifications

GENERAL

Type
Amateur VHF/UHF transceiver
Frequency range
USA TX: 144-148 / 438-450 MHz RX: 118-136 / 136-174 / 400-480 MHz
Tuning steps
5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 KHz
Frequency stability
Within ±10 ppm @ -10 to +50°C (14 to 40°F)
Mode
TX: FM RX: AM / FM
Channels / memory management
200 regular with alpha tags 1 call Non-volatile EEPROM storage
Repeater shift / offset
±0 to 29.95 MHz in 50 KHz steps
Power supply
6 or 9.6 V battery pack or 5.5-16 VDC external
Current drain / power consumption
RX: 25-115 mA (Depending on configuration) TX: 300 mA-1.7 A
Antenna impedance / connector
50 ohm / SMA
Dimensions (W*H*D)
54*120*44 mm (2.13*4.72*1.73"), with PB-39
Weight
380 g (13.4 oz), with PB-39
Other features
CTCSS/PL. DTMF. AIP. Built-in 1200bd TNC. APRS. "Sky Command II".

RECEIVER SECTION

Receiver system
Double conversion superheterodyne 1st IF: 38.85 MHz (VHF) - 45.05 MHz (UHF) 2nd IF: 450 KHz (VHF) - 455 KHz (UHF)
Sensitivity
0.18 uV (12 dB SINAD) (VHF sub-band: <0.28 uV for 12 dB SINAD)
Selectivity
12 KHz (-6 dB) 28 KHz (-40 dB)
AF output power / speaker
450 mW at 10% distortion / 8 ohm
External speaker connector
2.5 mm

TRANSMITTER SECTION

Modulation system
Reactance
Max FM deviation (Factory set)
±5 KHz
Spurious emissions
Better than -60 dB
Microphone impedance / connector
2 Kohm / 3-pin (3.5 mm)
Microphone input level
? mV
User reviews

Write a review

Share your experience with the Kenwood TH-D7A

0/10 characters minimum