Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TM-D700E
Confidence score: 50%
Estimated value
215€
Theoretical estimate
182€
Minimum
247€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 118-524 / 800-1300 MHz
- Tuning steps
- 5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 KHz
- Frequency stability
- Max ±3 ppm @ -10 to +50°C (14 to 122°F)
- Mode
- TX: FM / NFM RX: AM / FM / NFM
- Channels / memory management
- 200 regular with alpha tags 2 call (1 per band) 5 PM channels Non-volatile EEPROM storage
- Repeater shift / offset
- ±0 to 29.95 MHz (in 50 KHz steps)
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: Max 1 A TX: Max 11.5 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- Main unit: 140*40*195 mm (5.51*1.57*7.68") Front panel: 140*60*34 mm (5.51*2.36*1.30")
- Weight
- Main unit: 1.2 Kg (2.6 lb) Front panel: 180 g (6.3 oz)
- Other features
- Built-in TNC 1K2/9K6 with APRS, DX-info and BBS. CTCSS/PL, DCS. DTMF memories. 1750 Hz tone call. Twin RX (V+U/V+V/U+U).
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 38.85 MHz (VHF) - 45.05 MHz (UHF) 2nd IF: 450 KHz (VHF) - 455 KHz (UHF)
- Sensitivity
- Main band: 0.16 uV (12 dB SINAD) Sub band: 0.25 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 28 KHz (-40 dB)
- AF output power / speaker
- 2 W at 5% distortion / 16 ohm
- External speaker connector
- Two 3.5 mm, 8-16 ohm
TRANSMITTER SECTION
- Modulation system
- Reactance
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance/connector
- 600 ohm / 8-pin modular
User reviews
Write a review
Share your experience with the Kenwood TM-D700E