Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TM-V708A
Confidence score: 50%
Estimated value
215€
Theoretical estimate
182€
Minimum
247€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- USA TX: 144-148 / 438-450 MHz RX: 118-524 / 800-1300 MHz (Cellular blocked)
- Tuning steps
- 5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 KHz
- Frequency stability
- ±3 ppm @ -10 to +50°C (14 to 122°F)
- Mode
- TX: FM RX: AM / FM
- Channels / memory management
- 200 regular with alpha tags (8 characters) 2 call (1 per band) 5 PM channels 10 DTMF memories (Up to 16 digits each) Non volatile EEPROM storage
- Repeater shift / offset
- ±0 to 29.95 MHz (in 50 KHz steps)
- Power supply
- 13.8 VDC
- Current drain / power consumption
- RX: Max 1 A TX: 4 to 11.5 A
- Antenna impedance / connector
- 50 ohm / N-jack
- Dimensions (W*H*D)
- Main unit: 140*40*195 mm (5.51*1.57*7.68") Front panel: 140*60*34 mm (5.51*2.36*1.4")
- Weight
- Main unit: 1.2 Kg (2.65 lb) Front panel: 180 g (6.35 oz)
- Other features
- CTCSS/PL and DTSS. Tone scan. Connector for external TNC. Visual scan. Crossband repeater. Dimmer. AIP. Twin RX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 38.85 MHz (VHF) - 45.05 MHz (UHF) 2nd IF: 450 KHz (VHF) - 455 KHz (UHF)
- Sensitivity
- Main: 0.16 uV (12 dB SINAD) Sub: 0.25 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 28 KHz (-40 dB)
- AF output power / speaker
- 2 W at 5% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- Modulation system
- Reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin modular
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TM-V708A