Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TM-V71A
Confidence score: 50%
Estimated value
262€
Theoretical estimate
247€
Minimum
277€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- USA TX: 144-148 / 438-450 MHz RX: 118-524 / 800-1300 MHz (Cellular blocked)
- Tuning steps
- 5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 KHz
- Frequency stability
- ±5 ppm @ -20 to +60°C (-4 to +140°F)
- Mode
- TX: FM / NFM RX: AM / FM / NFM
- Channels / memory management
- 1000 multifunction memories with alpha tags 5 PM channels (For storing 5 transceiver configurations) 1 call 10 DTMF memories (Up to 16 digits each) Non-volatile EEPROM storage
- Repeater shift / offset
- ±0-29.95 MHz in 50 KHz steps
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: Max 1.2 A TX: 5 to 13 A
- Antenna impedance / connector
- 50 ohm / SO-239 (M-jack)
- Dimensions (W*H*D)
- Body: 140*43*181 mm (5.51*1.69*7.13") Panel: 140*43*38 mm (5.51*1.69*1.5")
- Weight
- Body with panel: 1.5 Kg (3.31 lb)
- Other features
- CTCSS/PL and DCS. WX alert . Digital voice recorder option. AIP. Echolink functions. Packet TNC connector. PC connector. Twin RX. Detachable front panel.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 45.05 MHz (Band A), 49.95 MHz (Band B) 2nd IF: 455 KHz (Band A), 450 KHz (Band B)
- Sensitivity
- 0.16 uV (12 dB SINAD)
- Selectivity
- 11 KHz (-6 dB) 30 KHz (-50 dB)
- AF output power / speaker
- 2 W at 5% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- Modulation system
- Reactance
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance/connector
- 600 ohm / 8-pin modular
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TM-V71A