Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TM-V7A
Confidence score: 50%
Estimated value
189€
Theoretical estimate
144€
Minimum
234€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- USA & Canada TX: 144-148 / 438-450 MHz RX: 118-174 / 410-470 MHz General market TX: 144-148 / 430-440 MHz RX: 118-174 / 410-470 MHz
- Tuning steps
- 5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
- Frequency stability
- ±3 ppm @ -20 to +60°C (-4 to +140°F)
- Mode
- TX: FM RX: AM / FM
- Channels / memory management
- 280 regular with alpha tags (140 per band) 2 call (1 per band)
- Repeater shift / offset
- ±0 to 29.95 MHz in 50 KHz steps
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: Less than 1 A TX: Less than 11 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 140*40*189 mm (5.51*1.58*7.44")
- Weight
- 1.2 Kg (2.65 lb)
- Other features
- CTCSS/PL with tone scan. DTSS. 1K2/9K6 bd packet port. Dimmer. Visual scan. DTMF paging. AIP. Crossband repeater. Twin RX (V+V / V+U / U+U).
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 38.85 MHz (VHF) - 45.05 MHz (UHF) 2nd IF: 450 KHz (VHF) - 455 KHz (UHF)
- Sensitivity
- Main band: 0.16 uV (12 dB SINAD) Sub band: 0.25 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB), 28 KHz (-60 dB)
- AF output power / speaker
- 2 W at 5% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- Modulation system
- Reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TM-V7A