Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TR-9000
Confidence score: 50%
Estimated value
156€
Theoretical estimate
122€
Minimum
190€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- Europe and Japanese domestic market TX: 144-146 MHz RX: 144-146 MHz USA TX: 143.9-149 MHz RX: 143.9-149 MHz
- Tuning steps
- 100 Hz, 12.5 / 25 KHz (Europe) 100 Hz, 5 / 10 KHz (USA)
- Frequency stability
- Within ±500 Hz during the first hour after 1 minute warmup Within 50 Hz any 30 minutes thereafter @ 25° (77°F)
- Mode
- FM / SSB / CW
- Channels / memory management
- 5 regular (Memory 5 can also store "odd split") RAM storage (Backup power option, male 3-pin jack)
- Repeater shift / offset
- ±600 KHz
- Power supply
- 13.8 VDC ±15% (Male 2-pin jack)
- Current drain / power consumption
- RX: Max 400 mA (Squelched) TX: 1.3-2.9 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 170*68*234 mm (6.69*2.68*9.21")
- Weight
- 2.5 Kg (5.51 lb)
- Other features
- 1750 Hz repeater ton (Europe). NB. RIT.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne (SSB/CW) IF: 10.695 MHz Double conversion superheterodyne (FM) 1st IF: 10.695 MHz 2nd IF: 455 KHz
- Sensitivity
- FM: 0.25 uV (12 dB SINAD) SSB/CW: 0.25 uV (10 dB S/N)
- Squelch sensitivity
- 0.2 uV (Threshold)
- Selectivity
- FM: 12 KHz (-6 dB) 25 KHz (-60 dB) SSB/CW: 2.2 KHz (-6 dB) 4.8 KHz (-60 dB)
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- TS "Minijack" (3.5 mm)
TRANSMITTER SECTION
- Modulation system
- FM: Variable reactance SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- High: Better than -60 dB Low: Better than -46 dB
- Microphone impedance / connector
- 500 ohm / 6-pin (Male locking ring jack)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TR-9000