Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TR-9500
Confidence score: 50%
Estimated value
332€
Theoretical estimate
282€
Minimum
382€
Maximum
Specifications
GENERAL
- Type
- Amateur UHF transceiver
- Frequency range
- TX: 430-440 MHz RX: 430-440 MHz
- Tuning steps
- FM: 1 / 5 / 25 KHz SSB: 100 Hz / 10 KHz
- Frequency stability
- ±10 ppm @ -20 to +50°C (-4 to +122°F)
- Mode
- FM / SSB / CW
- Channels / memory management
- 6 regular (Memory 6 can also store split frequencies) RAM storage, external voltage required for retention
- Repeater shift / offset
- -1.6 and -7.6 MHz
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 700 mA (No signal) + 2 mA for memory backup TX: Max 3.8 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 170*68*241 mm (6.69*2.68*9.49")
- Weight
- 2.7 Kg (5.94 lb)
- Other features
- NB. 1750 Hz repeater tone (Europe)
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 21.6 MHz 2nd IF: 455 KHz (FM), 8.83 MHz (SSB/CW)
- Sensitivity
- FM: 0.25 uV (12 dB SINAD) SSB/CW: 0.5 uV (20 dB S/N)
- Selectivity
- FM 14 KHz (-6 dB) 20 KHz (-60 dB) SSB/CW 2.4 KHz (-6 dB) 4.8 KHz (-60 dB)
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- FM
- 10 W
- SSB (PEP)
- 10 W
- CW
- 10 W
- Modulation system
- FM: Variable reactance direct shift SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 500 ohm / 6-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TR-9500