Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-120V
Confidence score: 50%
Estimated value
290€
Theoretical estimate
246€
Minimum
333€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-80 m + WWV in 9 bands 3.5-4.0 MHz 7.0-7.3 MHz 14.0-14.35 MHz 21.0-21.45 MHz 28.0-28.5 MHz 28.5-29.0 MHz 29.0-29.5 MHz 29.5-29.7 MHz WWV 15.0 MHz (RX only)
- Tuning steps
- Analog / continuous
- Frequency stability
- Within ±1 KHz during the first hour after power on. Within 100 Hz during any 30 minute period thereafter.
- Mode
- SSB / CW
- Channels / memory management
- 4 optional XTAL controlled
- Repeater shift / offset
- No
- Power supply
- 12-16 VDC
- Current drain / power consumption
- RX: 700 mA TX: Max 4 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 241*94*235 mm (9.49*3.7*9.25")
- Weight
- 4.9 Kg (10.8 lb)
- Other features
- VOX. NB. RIT. IF-shift.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne IF: 8.83 MHz
- Sensitivity
- 0.5 uV (10 dB S+N/N)
- Selectivity
- SSB 2.4 KHz (-6 dB) 4.2 KHz (-60 dB) CW (With optional CW filter) 500 Hz (-6 dB) 1.5 KHz (-60 dB)
- Image rejection
- 50 dB
- AF output power / speaker
- 1.5 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- SSB (PEP)
- ~10 W (25 W input)
- CW (DC)
- ~10 W (20 W input)
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- 500 ohm to 50 Kohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-120V