Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-130S
Confidence score: 50%
Estimated value
422€
Theoretical estimate
359€
Minimum
485€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-80 m + WARC in 11 bands 3.5-4.0 MHz 7.0-7.3 MHz 10.1-10.15 MHz 14.0-14.35 MHz 18.068-18.168 MHz 21.0-21.45 MHz 24.89-24.99 MHz 28.0-28.5 MHz 28.5-29.0 MHz 29.0-29.5 MHz 29.5-29.7 MHz
- Tuning steps
- Analog / continuous
- Frequency stability
- Within ±1 KHz during the first hour after power on. Within 100 Hz during any 30 minute period thereafter. /td>
- Mode
- SSB / CW
- Channels / memory management
- 4 optional XTAL controlled
- Repeater shift / offset
- No
- Power supply
- 13.8 VDC
- Current drain / power consumption
- RX: Max 700 mA TX: Max 18 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 241*94*293 mm (9.6*3.8*11.7")
- Weight
- 5.6 Kg (12.4 lb)
- Other features
- IF Shift. VOX. NB.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne IF: 8.83 MHz
- Sensitivity
- 0.25 uV (10 dB S+N/N)
- Selectivity
- SSB/CW Wide 2.4 KHz (-6 dB) 4.2 KHz (-60 dB) SSB Narrow (With optional YK-88SN filter) 1.8 KHz (-6 dB) 3.3 KHz (-60 dB) CW Narrow (With optional YK-88C filter) 500 Hz (-6 dB) 1.5 KHz (-60 dB) CW Narrow (With optional YK-88CN filter) 270 Hz (-6 dB) 1.1 KHz (-60 dB)
- Image rejection
- 50 dB
- AF output power / speaker
- 1.5 W at ?% distortion / ? ohm
- External speaker connector
- 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- 500 ohm to 50 Kohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-130S