Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-510
Confidence score: 50%
Estimated value
196€
Theoretical estimate
108€
Minimum
284€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- 80 m
- 3.5-4.0 MHz
- 40 m
- 7.0-7.3 MHz
- 20 m
- 14.0-14.35 MHz
- 15 m
- 21.0-21.45 MHz
- 10 m
- 29.1-29.7 MHz
- Tuning steps
- Analog / continuous
- Frequency stability
- Within ±2 KHz during 60 minutes after power on. Within 100 Hz during any 30 minute period thereafter.
- Mode
- SSB / CW
- Channels / memory management
- None
- Repeater shift / offset
- No
- Power supply
- Mains: 230 / 250 VAC (Separate PS-510 PSU)
- Current drain / power consumption
- RX: ? W TX: ? W
- Antenna impedance / connector
- 50-75 ohm / SO-239
- Dimensions (W*H*D)
- 330*180*345 mm (12.99*7.09*13.58")
- Weight
- 9.5 Kg (20.94 lb)
- Other features
- 25 KHz calibrator. VOX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 8.295-8.895 MHz 2nd IF: 3.395 MHz
- Sensitivity
- 15-80 m: better than 0.5 uV (10 dB S/N) 10 m: better than 1.5 uV (10 dB S/N)
- Selectivity
- SSB 2.4 KHz (-6 dB) 4.8 KHz (-60 dB) CW 500 Hz (-6 dB) 1.5 KHz (-60 dB)
- Image rejection
- 50 dB
- AF output power / speaker
- 1 W at 10% distortion / External only
- External speaker connector
- Via the 12-pin PSU-connector, 8 ohm
TRANSMITTER SECTION
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -50 dB
- Microphone impedance / connector
- 50 Kohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-510