Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-570D
Confidence score: 50%
Estimated value
431€
Theoretical estimate
366€
Minimum
496€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-160 m + WARC RX: 0.5-30 MHz
- Tuning steps
- 1 / 10 / 100 Hz 1 / 5 / 9 / 10 / 12.5 / 20 / 25 / 100 / 500 KHz 1 MHz
- Frequency stability
- ±10 ppm @ -10 to +50° C (14 to 122°F)
- Mode
- AM / FM / SSB / CW / FSK
- Channels / memory management
- 100 regular 5 quick memories RAM storage with lithium battery backup
- Repeater shift / offset
- No dedicated. Use VFO A/B split instead
- Power supply
- 13.8 VDC ±15% (6-pin Molex)
- Current drain / power consumption
- RX: 2 A (No signal) TX: Max 20.5 A
- Antenna impedance / connector
- 50 ohm / Two SO-239 (16.7-150 ohm with built-in antenna tuner)
- Dimensions (W*H*D)
- 270*96*271 mm (10.63*3.78*10.67")
- Weight
- 6.8 Kg (15 lb)
- Other features
- CTCSS/PL. 1750 Hz repeater tone. Built-in keyer and auto-AT. VOX. Computer control. DSP.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne (AM/SSB/CW/FSK) 1st IF: 73.05 MHz 2nd IF: 8.83 MHz Triple conversion superheterodyne (FM) 1st IF: 73.05 MHz 2nd IF: 8.83 MHz 3rd IF: 455 KHz
- Sensitivity
- AM (10 dB S+N/N) 0.5-1.705 MHz: 31.6 uV 1.705-24.5 MHz: 2 uV 24.5-30 MHz: 1.3 uV FM (12 dB SINAD) 28-30 MHz: 0.25 uV SSB/CW/FSK (10 dB S+N/N) 0.5-1.705 MHz: 4 uV 1.705-24.5 MHz: 0.2 uV 24.5-30 MHz: 0.13 uV
- Selectivity
- AM 4 KHz (-6 dB) 20 KHz (-50 dB) FM 12 KHz (-6 dB) 25 KHz (-50 dB) SSB/CW/FSK 2.2 KHz (-6 dB) 4.4 KHz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 1.5 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- AM
- 5-25 W (In 5 W steps)
- FM
- 5-100 W (In 5 W steps)
- SSB (PEP)
- 5-100 W (In 5 W steps)
- CW/FSK
- 5-100 W (In 5 W steps)
- Modulation system
- AM: Low level FM: Reactance SSB: Balanced
- Max FM deviation (Factory set)
- Wide: ±5 KHz Narrow: ±2.5 KHz
- Spurious emissions
- Better than -50 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-570D