Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-700
Confidence score: 50%
Estimated value
22€
Theoretical estimate
19€
Minimum
25€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- Europe TX: 144-146 MHz RX: 144-146 MHz Japanese domestic market TX: 144-146 MHz RX: 144-146 MHz
- Tuning steps
- Analog / continuous
- Frequency stability
- Within 4 KHz during one hour after one minute warmup. Within 200 Hz during any 30 minute period thereafter
- Mode
- AM / FM / SSB / CW
- Channels / memory management
- 11 optional XTAL controlled
- Repeater shift / offset
- -600 KHz
- Power supply
- Mains: 100 VAC (Japan) / 120 / 240 VAC (Other markets) or 12-16 VDC
- Current drain / power consumption
- RX: 0.8-1 A @ 13.8 VDC TX: Max 4 A @ 13.8 VDC
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 278*124*320 mm (10.94*4.88*12.6")
- Weight
- 11 Kg (24.25 lb)
- Other features
- 1750 Hz repeater tone (Europe). NB. SWR meter.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne (AM/SSB/CW) 1st IF: 10.7 MHz Double conversion superheterodyne (FM) 1st IF: 10.7 MHz 2nd IF: 455 KHz
- Sensitivity
- AM: 2 uV (10 dB S/N) FM: 1 uV (26 dB S/N) SSB/CW: 0.5 uV (10 dB S/N)
- Selectivity
- AM/SSB/CW 2.4 KHz (-6 dB) 4.8 KHz (-60 dB) FM 20 KHz (-6 dB) 40 KHz (-60 dB)
- Image rejection
- 60 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- AM
- 3 W
- FM
- 10 W
- SSB (PEP)
- 10 W
- CW
- 10 W
- Modulation system
- AM: Low power modulation FM: Variable reactance frequency shift SSB: Balanced modulation
- Max FM deviation (Factory set)
- ±5 KHz (Adjustable up to ±10 KHz)
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 500 ohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-700