Kenwood TS-700S

Source: rigpix

Transceivers
Updated: 09/02/2026

Kenwood TS-700S

Confidence score: 50%
Estimated value
263€

Theoretical estimate

224€

Minimum

303€

Maximum

Specifications

GENERAL

Type
Amateur VHF transceiver
Frequency range
Europe TX: 144-146 MHz RX: 144-146 MHz USA TX: 144-148 MHz RT: 144-148 MHz
Tuning steps
Continuous
Frequency stability
Within ±2 KHz during one hour after one minute warmup. Within 150 Hz during any 30 minute period thereafter
Mode
AM / FM / SSB / CW
Channels / memory management
11 optional XTAL controlled
Repeater shift / offset
-600 KHz
Power supply
Mains: 110-120 / 220-240 VAC or 12-16 VDC
Current drain / power consumption
RX: 1.2 A (No signal) @ 13.8 VDC - 48 W @ mains TX: Max 4 A @ 13.8 VDC - Max 98 W @ mains
Antenna impedance / connector
50 ohm / SO-239
Dimensions (W*H*D)
278*124*320 mm (10.94*4.88*12.6")
Weight
11 Kg (24.25 lb)
Other features
VOX. NB. RIT. 1750 Hz repeater tone (Europe). Digital readout.

RECEIVER SECTION

Receiver system
Single conversion superheterodyne (AM/SSB/CW) IF: 10.7 MHz Double conversion superheterodyne (FM) 1st IF: 10.7 MHz 2nd IF: 455 KHz
Sensitivity
AM: 1 uV (10 dB (S+N)/N) FM: 0.4 uV (20 dB noise quieting) SSB/CW: 0.25 uV (10 dB (S+N)/N)
Squelch sensitivity
0.25 uV (Threshold)
Selectivity
AM/SSB/CW 2.4 KHz (-6 dB) 4.8 KHz (-60 dB) FM 12 KHz (-6 dB) 24 KHz (-60 dB)
Image rejection
70 dB
AF output power / speaker
2 W at 10% distortion / 8 ohm
External speaker connector
TS "Minijack" (3.5 mm), 8 ohm

TRANSMITTER SECTION

Modulation system
AM: Low power modulation FM: Variable reactance frequency shift SSB: Balanced modulation
Max FM deviation (Factory set)
±5 KHz
Spurious emissions
Better than -60 dB
Microphone impedance / connector
500 ohm / 4-pin (Male locking ring jack)
Microphone input level
? mV
User reviews

Write a review

Share your experience with the Kenwood TS-700S

0/10 characters minimum