Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-700SP
Confidence score: 50%
Estimated value
342€
Theoretical estimate
291€
Minimum
393€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- Europe TX: 144-146 MHz RX: 144-146 MHz USA TX: 144-148 MHz RT: 144-148 MHz
- Tuning steps
- Continuous
- Frequency stability
- Within ±3 KHz during one hour after one minute warmup. Within 150 Hz during any 30 minute period thereafter
- Mode
- AM / FM / SSB / CW
- Channels / memory management
- 11 optional XTAL controlled
- Repeater shift / offset
- -600 KHz
- Power supply
- Mains: 110-120 / 220-240 VAC or 12-16 VDC
- Current drain / power consumption
- RX: 1.2 A (No signal) @ 13.8 VDC - 48 W @ mains TX: Max 4 A @ 13.8 VDC - Max 98 W @ mains
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 278*124*320 mm (10.94*4.88*12.6")
- Weight
- 11 Kg (24.25 lb)
- Other features
- VOX. NB. RIT. 1750 Hz repeater tone (Europe). Digital readout.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne (AM/SSB/CW) IF: 10.7 MHz Double conversion superheterodyne (FM) 1st IF: 10.7 MHz 2nd IF: 455 KHz
- Sensitivity
- AM: 1 uV (10 dB (S+N)/N) FM: 0.4 uV (20 dB noise quieting) SSB/CW: 0.25 uV (10 dB (S+N)/N)
- Squelch sensitivity
- 0.25 uV (Threshold)
- Selectivity
- AM/SSB/CW 2.4 KHz (-6 dB) 4.8 KHz (-60 dB) FM 12 KHz (-6 dB) 24 KHz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 2 W at 10% distortion / 8 ohm
- External speaker connector
- TS "Minijack" (3.5 mm), 8 ohm
TRANSMITTER SECTION
- Modulation system
- AM: Low power modulation FM: Variable reactance frequency shift SSB: Balanced modulation
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 500 ohm / 4-pin (Male locking ring jack)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-700SP