Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-811E
Confidence score: 50%
Estimated value
298€
Theoretical estimate
253€
Minimum
343€
Maximum
Specifications
GENERAL
- Type
- Amateur UHF transceiver
- Frequency range
- Europe TX: 430-440 MHz RX: 430-440 MHz
- Tuning steps
- 10 / 100 Hz 1 / 5 / 12.5 KHz
- Frequency stability
- ±1.2 KHz @ 1 to 60 minutes after power on Within 50 Hz every 30 minutes thereafter
- Mode
- FM / SSB / CW
- Channels / memory management
- 35 regular 3 odd split 2 scan edge 1 Com (Call) RAM storage with lithium battery backup
- Repeater shift / offset
- -1.6 MHz and -7.6 MHz
- Power supply
- Mains: 120 / 220 / 240 VAC (3-pin IEC C14 connector) or 12-16 VDC
- Current drain / power consumption
- RX: Max 1.4 A TX: Max 8 A
- Antenna impedance / connector
- 50 ohm / N-jack
- Dimensions (W*H*D)
- 270*96*260 mm (10.6*3.8*10.2")
- Weight
- 7.2 Kg (15.9 lb)
- Other features
- 1750 Hz repeater tone. DCS.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 30.265 MHz 2nd IF: 10.695 MHz (SSB/CW), 455 KHz (FM)
- Sensitivity
- FM: 0.22 uV (12 dB SINAD) SSB/CW: 0.14 uV (10 dB S+N/N)
- Selectivity
- FM 12 KHz (-6 dB) 24 KHz (-60 dB) SSB/CW 2.2 KHz (-6 dB) 4.8 KHz (-60 dB)
- AF output power / speaker
- 2 W at 5% distortion / 8 ohm
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- FM
- 2-25 W
- SSB (PEP)
- 2-25 W
- CW
- 2-25 W
- Modulation system
- FM: Reactance SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-811E