Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-900
Confidence score: 50%
Estimated value
342€
Theoretical estimate
291€
Minimum
393€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-80 m i 8 bands 3.5-4.0 MHz 7.0-7.5 MHz 14.0-14.5 MHz 21.0-21.5 MHz 28.0-28.5 MHz 28.5-29.0 MHz 29.0-29.5 MHz 29.5-30.0 MHz + 15.0 MHz WWV receive only
- Tuning steps
- Analog / continuous
- Frequency stability
- 100 Hz per 15 minutes after warm-up
- Mode
- SSB / CW / FSK
- Channels / memory management
- 2 optional XTAL controlled
- Repeater shift / offset
- No
- Power supply
- Mains: 120 / 240 VAC (Separate PS-900 PSU) or 13.8 VDC (with DS-900 option)
- Current drain / power consumption
- RX: Less than 40 W (Heaters off) TX: Less than 410 W
- Antenna impedance / connector
- 50 ohm / SO-239 (RX/TX) 50 ohm / Phono (RCA), for RX only
- Dimensions (W*H*D)
- 320*140*320 mm (12.6*5.51*12.6")
- Weight
- 12 Kg (26.46 lb)
- Other features
- NB. VOX. Phone patch connectors. 25 & 100 KHz XTAL calibrator.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 8.395-8.895 MHz 2nd IF: 3.395 MHz
- Sensitivity
- 0.5 uV (10 dB (S+N)/N)
- Selectivity
- SSB/FSK 2.2 KHz (-6 dB) 4.4 KHz (-60 dB) CW (With optional CW filter) 0.5 KHz (-6 dB) 1.5 KHz (-60 dB)
- Image rejection
- 50 dB
- AF output power / speaker
- 1 W at 10% distortion / 8 ohm
TRANSMITTER SECTION
- SSB (PEP)
- 150 W
- CW (DC)
- 100 W
- FSK
- 50 W
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- Hi-Z / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-900