Kenwood TS-930S

Name: Kenwood TS-930S
Brand: Kenwood
Availability: InStock

Confidence score: 50%

Estimated value

478€

Theoretical estimate

406€

Minimum

550€

Maximum

Specifications

Type: Amateur HF transceiver
Frequency range: TX: 10-160 m + WARC RX: 0.15-30 MHz
Tuning steps: 10 Hz
Frequency stability: Within ±200 Hz during the first hour after power on. Within ±30 Hz any 30 minute period thereafter.
Mode: AM / SSB / CW / FSK
Channels / memory management: 8 regular RAM storage with battery backup (Three LR6 / AA batteries)
Repeater shift / offset: No
Power supply: Mains: 120 / 220 / 240 VAC (3-pin IEC C14 connector)
Current drain / power consumption: RX: Max 80 W TX: Max 510 W
Antenna impedance / connector: 50 ohm / SO-239
Dimensions (W*H*D): 374*141*350 mm (14.72*5.55*13.78")
Weight: 16.8 Kg (37 lb), without options
Other features: Two noise blankers. SSB slope tuning. VOX. IF output. Transverter port. Phone patch port.

Receiver system: Quadruple conversion superheterodyne 1st IF: 44.93 MHz 2nd IF: 8.83 MHz 3rd IF: 455 KHz 4th IF: 100 KHz
Sensitivity: AM (10 dB S/N) 0.15-0.5 MHz: 10 uV 0.5-1.8 MHz: 32 uV 1.8-30 MHz: 2 uV SSB/CW/FSK (10 dB S/N) 0.15-0.5 MHz: 1 uV 0.5-1.8 MHz: 4 uV 1.8-30 MHz: 0.25 uV
Selectivity: AM(W), without optional filter 6 KHz (-6 dB) 18 KHz (-60 dB) AM(N) 2.7 KHz (-6 dB) 4 KHz (-60 dB) SSB/CW/FSK (Without optional filters) 2.7 KHz (-6 dB) 4 KHz (-60 dB)
Image rejection: 80 dB
AF output power / speaker: 1.5 W at 10% distortion / 8 ohm
External speaker connector: 3.5 mm

AM: ~25 W (80 W input)
SSB (PEP): ~125 W (250 W input)
CW (DC): ~125 W (250 W input)
FSK: ~125 W (250 W input)
Modulation system: AM: Low level (IF stage) SSB: Balanced
Max FM deviation (Factory set): No FM
Spurious emissions: Better than -? dB
Microphone impedance / connector: 500 ohm to 50 Kohm / 8-pin (Metal locking ring connector)
Microphone input level: ? mV

User reviews

Share your experience with the Kenwood TS-930S